According to the role and structure, it can be divided into overhang clamp, tensile wire clip, UT wire clip, connecting fitting, connecting fitting, protective fitting, equipment wire clip, T-type wire clip, busbar fitting, pull wire fittings and other categories; According to the purpose, it can be used as line fittings and substation fittings。
T-type distribution box hoop: install various types of 10 to 20 pairs and 30 to 50 pairs of outdoor circular distribution boxes on cement poles and wooden poles without reserved holes; Distribution box hoop: install various types of 5~50 pairs of flat breakout boxes on cement poles and wooden poles without reserved holes; Upper pole hoop: line operator on the cement pole up and down the pole; Foot bracing hoop: install foot brace on cement pole without reserved holes; Chuck clamp: In order to increase the anti-tilting ability of the cement rod in the soft soil, when the chuck is installed on the ground, the elastic effect of the chuck fastening to the pole with the clamp can have a certain compensatory effect on cooling or shortening the hose due to hose aging. Elastic clamps are ideal for connecting the lines of automotive cooling, heating and ventilation systems.
Adjust the thread clip nut to the appropriate position and insert the branch wire completely into the branch cord cap sleeve. Insert the main line, the main line has two layers of insulation skin, then a certain length of outer insulation skin should be stripped at the connection location. The main branch line is placed in place and kept parallel, first tighten the nut by hand and fix the clip. Tighten the nut evenly with the socket wrench of the appropriate size until the top breaks off and the installation is complete.
Post time: Jun-24-2022
