Manufacturer for Wire Clamp Overhead Line Fitting - Angle Steel Crossarm With Support Crossarm – Electric
Manufacturer for Wire Clamp Overhead Line Fitting - Angle Steel Crossarm With Support Crossarm – Electric Detail:
Video
Supply Ability
10000 Piece/Pieces per Month
Packaging & Delivery
Packaging Details: Standard export packing or According to customer’s requirement
Port: Tianjin Port
Description
Straight cross arm: only considered in normal without bolt, under vertical load and horizontal load of the wire; Tension cross arm: conductor under vertical and horizontal load, the poor will also bear wire pulling force; Angle of cross arm, except under vertical and horizontal load of the wire will also bear big unilateral wire tension.
According to the force of the cross arm, the straight rod or 15 Angle pole adopts single cross arm, under the corner at the corner of 15 degrees above rod, tension rod, terminal rod, branch rod with double cross arm. Cross arm general installation from the peak of 300 mm, straight cross arm should be installed in the side, branch Angle pole, pole terminal, rod cross arm should be installed in the thread side. angle iron mainly applicate in shipbuilding and construction works .
Specification
Equal-leg angle (kg/m) | Unqual-leg angle (kg/m) | ||
DIMENSION | WEIGHT(KG/M) | DIMENSION | WEIGHT(KG/M) |
20*20*3 | 0.889 | 45*30*4 | 2.251 |
25*25*4 | 1.459 | 50*32*4 | 2.494 |
30*30*3 | 1.373 | 56*36*4 | 2.818 |
40*40*5 | 2.976 | 63*40*6 | 4.638 |
45*45*5 | 3.369 | 75*50*5 | 4.808 |
50*50*5 | 3.770 | 90*56*6 | 6.770 |
56*56*5 | 4.251 | 100*63*10 | 12.142 |
63*63*4 | 3.907 | 100*80*8 | 10.946 |
70*70*8 | 8.373 | 110*70*7 | 9.656 |
75*75*8 | 9.030 | 125*80*7 | 11.066 |
80*80*5 | 6.211 | 140*90*8 | 14.160 |
90*90*6 | 8.350 | 160*100*10 | 19.872 |
100*100*8 | 12.276 | 180*110*10 | 22.273 |
110*110*7 | 11.928 | 200*125*12 | 29.761 |
120*120*12 | 21.666 | 100*75*6 | 8.060 |
125*125*10 | 19.133 | 150*90*9 | 16.400 |
130*130*13 | 25.400 | 200*100*12 | 27.620 |
150*150*10 | 23.000 | 200*100*15 | 34.040 |
140*140*12 | 25.522 | 180*110*12 | 26.464 |
160*160*14 | 33.987 | 160*100*14 | 25.247 |
180*180*18 | 48.634 | 125*80*10 | 15.474 |
200*200*25 | 73.600 | 90*56*8 | 8.779 |
175*175*15 | 39.400 | 63*40*5 | 3.920 |
Quick Detail
(1) Hot-Dip Galvanized angle iron
(2) According to use can be divided into: linear cross arm; angle iron of cross arm; Resistance to a cross arm.
(3) According to the material can be divided into: iron cross arm; Porcelain crossarm; Synthetic insulation cross arm
(4) Generally angle iron material are Q235B
(5) angle iron length:4M,5M,6M,9M,12M
(6) angle iron mainly applicate in shipbuilding and construction works .
Not all angle steel products listed in the form,Please contact our company if you have any requirement
Product detail pictures:
Related Product Guide:
We hold strengthening and perfecting our items and repair. At the same time, we get the job done actively to do research and progress for Manufacturer for Wire Clamp Overhead Line Fitting - Angle Steel Crossarm With Support Crossarm – Electric , The product will supply to all over the world, such as: Yemen, Lahore, Morocco, If any product meed your demand, please feel free to contact us. We're sure your any inquiry or requirement will get prompt attention, high-quality products, preferential prices and cheap freight. Sincerely welcome friends all over the world to call or come to visit, to discuss cooperation for a better future!
By tobin from Latvia - 2017.11.12 12:31
The factory has advanced equipment, experienced staffs and good management level, so product quality had assurance, this cooperation is very relaxed and happy!
By Nicole from Germany - 2018.12.05 13:53