Aluminum Alloy Tension Clamp Type NLL-3 Dead End Clamp
Supply Ability
1000000 Piece/Pieces per Year
Packaging & Delivery
Packaging Details: Standard export packing or According to customer's requirement
Port: Tianjin Port
Description
The radius of curvature is more than eight fold diameter of the suitable conductor, the percentage miniumm slip strength oclamp to rated ultim ate strength of conductor is shown in the following table
Aluminum Alloy Bolted Type Dead End Tension Clamp for Distribution Line
Tension clamps are used to fix conductor and ground wire through insulators or link fitting to tower arms or substation structrues.In according to the clamp construction and mounting way,the clamps include three types as compression type, bolt type and wedge type.The compression type include hydraulic type and explosive type.
1. Strain clamps fix conductors and ground wires through insulators or link fittngs to tower arms or substation structures.
2. According to the aluminum alloy strain clamps construction and mounting way, the aluminum alloy strain clamps include two types: compression type and bolt type.
3. The Aluminum Alloy Strain Clamps (Compression Type ) include Hydraulic and explosive type.
4. As the Bolt Type Aluminum Alloy Strain Clamps are used to AAC and ACSR, the conductor may to wound by aluminum tapes or preformed armour rods for protecing these taps or rods are included in the diameter of suitable conductor.
Specification
Tension Clamp | |||||||
Cat.No. | Conductor Section(mm2) | Conductor Range(mm2) | Overall Dia.(mm) | U-Bolts | Failure Load(kn) | Insulation Cover Type | |
No. | Size | ||||||
NLL-1(19) | 16-70 | 5.1-11.4 | 7.6-16.2 | 2 | M12 | 40 | NLL-1(19) |
NLL-2(22) | 50-95 | 8.5-13.8 | 8.5-19.6 | 2 | M12 | 40 | NLL-2(22) |
NLL-3(29) | 70-150 | 11.4-17.1 | 11.4-22.6 | 2 | M12 | 70 | NLL-3(29) |
3 | |||||||
NLL-4(32) | 120-240 | 13-18.9 | 13-26.4 | 3 | M12 | 70 | NLL-4(32) |
NLL-5(35) | 150-300 | 17.1-23.8 | 16.2-29.0 | 4 | M12 | 70 | / |
NLL-6 | 400-630 | 26.9-34.8 | 28.5-40 | 5 | M12 | 70 | / |
Note
1.Meaning of letters: N-strain clamp, L-aluminum alloy, L- bolted type; Numbers -serial number of the type.
2.Material: Body, Keeper-aluminum alloy, Split Pin-stainless steel, others-hot-dip galvanized steel.
3. Grip strength of the clamp shall be more than 65% of conductor breaking strength