page_head_bg

Product

Metal Strapping Ss Banding

Short Description:

Type: Fiber Optic Cable Clamp
Wiring Devices: Cable Fitting
Certification: CE, ISO
Condition: New
OEM: Accept
Sample: Availble

  • b01
  • b05
  • b06
  • 8ab12aa5
  • 3

Product Detail

Product Tags

Description

Metal Strapping 7

Metal Strapping 8

Metal Strapping 9

 

Stainless steel banding
Product advantages:
All Well straps made of C201 stainless steel have a bright finish with fully rounded edges, excellent tensile properties, good resistance to oxidation and corrosive agents, which allows their use in environments where high resistance to corrosion is required, to fix pipes, cables, etc.

Features:

  • Tensile strength: 600 N / mm2
  • Yield strength: 275 N / mm2
  • Elongation (break): 40%
  • Temperature: -60°C up to +60°C
  • Standard: AISI 201

Measures:

  • Width: 19mm
  • Thickness: 0.7mm
  • Length: 30 m. per roll
  • Metal Strapping 10
  • Installation steps: 
    1. According to the actual use, cut a certain length of stainless steel cable tie, thread the buckle to one end of the tape, and reserve a length of about 5cm(Cutting length = the required length of the bundle+5cm+10cm).
    2. Bend the reserved tape to preliminarily fix the stainless steel buckle.
    3. When strapping, wear the other end of the stainless steel tape, and reserve a length of at least about 10cm for the strap tightening machine to pull into the tape.
    4. clamping the tape with a tightening machine, and start to shake the rocker arm to slowly pull in the tape. Make sure that the tape is just tightened. Do not tighten the tape too much to avoid damaging the tool.
    5. When the tape is tightened, fold back the entire strap tightening machine and cut the tape by turning the blade handle.
    6. Knock the two corners of the buckle flat with a hammer to block the final tape head to complete the binding process.

    Wide range of applications Suitable for bundling all kinds of signs, traffic lights, cameras, pipelines, ships, bucket insulation projects, monitoring boxes, equipment electrical boxes, pole brackets, cable trays, etc.
    304 material It is made of high-quality 304 stainless steel, with good toughness, fire-proof, waterproof and rust-proof, abrasion resistance, corrosion resistance, and durability.
    Excellent quality The slitting is complete, polished, trimmed to remove burrs, smooth and not hurting hands, safe and reliable.

  • Metal Strapping 11 Metal Strapping 12 Metal Strapping 13 Metal Strapping 14

Application

 

模板1 模板2

Certifications

 

 

 

Company Profile

Electric Powertek Company Ltd. was established in September 18, 2010 , located in Liangzhao Power industrial area
Renqiu City Hebei province, just 110 kilometers from tianjin port, we mainly research, develop and manufacture electric power line equipment, communication lines equipment, railway line fittings, electrical hardware, communication lines iron, electric iron fittings, ADSS, OPGW cable accessories, preformed guy grips, preformed interval rods, optical fiber closure, optical fiber distribution frame, fiber optic cable transfer box, optical fiber cable,carbon fiber compositeconductor,overhead insulated wire,ACSR, hot dip galvanized steel strand, power tower, steel tube rod, steel prop, cable tray, plastic products, silicone rubber and porcelain insulator, Lightning arrestor, isolating switch, fuse, transformer, safety instruments, high and low voltage electrical appliances, high and low voltage switch gear, our factory covers an area of 36000 square meters, to provide users with thousands of electric power communication and railway products.

Partner customers

Packing and Shipping

Contact

金具

  • Previous:
  • Next: